-
-
-
Product
The electric heating air furnace features a hot air chamber with interior lining materials made of stainless steel grades 304 or 310,which offer good corrosion resistance and durability.The heating elements can be made from materials such as aluminum,Q235 steel,seamless S304 tubes,or fin tubes,which are designed to efficiently transfer heat to the air.The furnace is insulated with alumina-silicate fiber,which provides effective thermal insulation and energy efficiency.It is equipped with an automatic temperature control system that can be interfaced with the system's PLC for automated temperature regulation.
The vacuum feeder operates by introducing material from the top and discharging it from the bottom of a storage hopper (cone hopper).It consists of three main parts:a filtration chamber,a clean air chamber,and a storage hopper (cone hopper).Dry powdery materials with good flow characteristics are conveyed into the vacuum feeder by a negative pressure system through the feed inlet.The material is separated from the air as it passes through the filter element,and then it falls by gravity into the storage hopper.With the aid of a pneumatic hammer or vibrator and air assistance in the storage hopper (cone hopper),the material is smoothly discharged from the outlet.Meanwhile,the negative pressure air,after being filtered through the filterelement,is exhausted from the clean air chamber,achieving the purpose of material transportation.Additionally,the storage hopper (cone hopper)is equipped with a high-level sensor to prevent blockages that could occur if the material is not discharged promptly.
Twin-Shaft Mixer Feeder (for Dry and Wet Materials)The twin-shaft mixer feeder is composed of a pair of rotating shafts,a housing,and a motor assembly.The driving motor powers the rotation of the shafts,which enables the continuous mixing of both dry and wet materials.This process enhances the solid content of the materials,facilitating their subsequent treatment or processing.
The volume feeder is primarily composed of a hopper,mixing device,screw conveyor,mixing motor,and screw motor.It is typically installed at the bottom of a silo for the continuous conveyance of materials.Itis suitable for transporting a variety of materials,including plastic granules,powders,calcium carbonate,talcum powder, titanium dioxide,resin film granules,flour,and starch.
The loss-in-weight feeder is composed of a hopper,a volumetric feeder,a weighing system,and a controller. It is a conveying device that provides high-precision continuous feeding ofmaterial.During operation,the hopper, material,and feeder are continuously weighed together.As the material is discharged,the actual rate of weight loss (the loss-in-weight rate)is measured and compared with the desired rate (the setpoint).Depending on the characteristics of the material,a mixing component can also be added to ensure proper feeding and accuracy.
FIBC ( Flexible Intermediate Bulk Container ) Unloading Station
The FIBC unloading station operates by using an electric hoist to lift the material bag into the feed hopper. After a worker manually opens the bottom discharge spout of the bag,the flow control valve and the attached vibration device are activated to encourage the powdery material inside the bag to fall by gravity into a hopper below. The maximum lifting weight can reach up to 3 tons,and the station can be customized according to actual production needs.
Add.No.277, Chigang Road, Bai Shazhou Subdistrict, Wangcheng District,Changsha City, Hunan Province China
Scan attention public number
Copyright: Hunan Huatong Powder Equipment Technology Co., Ltd.
This site supports IPv4、IPv6.
Powered by:www.300.cn ChangSha Privacy Policy